Maintaining The Router With Ftp Server - H3C MSR 30-20 ROUTER Installation Manual

Sending file to remote tftp server. Please wait... \
TFTP: 1045 bytes sent in 0 second(s).
File uploaded successfully.
Use this command to download the config.cfg file on the server to the router:
<DEVICE>tftp 192.168.0.1 get config.cfg config.cfg
The file config.cfg exists. Overwrite it?[Y/N]:y
Verifying server file...
Deleting the old file, please wait...
File will be transferred in binary mode
Downloading file from remote tftp server, please wait...\
TFTP: 1045 bytes received in 0 second(s)
File downloaded successfully.
If a config.cfg file already exists in the router, select <Y/y> to overwrite it.
If a config.cfg file already exists on the server, it will be overwritten.
The above operations are performed under user view.
The backup configuration file can be modified by text editor. The configuration file modified during
download process can modify the configuration, and the modification takes effect after rebooting.
Similarly, you can also download application program to the router to overwrite the old main
program to upgrade the application program.

Maintaining the Router with FTP Server

Maintaining the router when it serves as the server
FTP (File Transfer Protocol) is an application layer protocol in the TCP/IP suit. It mainly transfers files
among remote hosts. Born over TCP, it provides reliable and connection-oriented data transfer service
but does not provide access authorization and authentication mechanism.
The FTP service provided by the router is FTP Server, that is to say, the router serves as the FTP Server.
You can run FTP Client to log onto the router and access files on the router.
Install FTP Client before using FTP. No FTP Server is available with the MSR 30 series. You must install
one yourself. Take the FTP Client with Windows XP for example.
Step 1: Build hardware maintenance environment as follows:
5-18