Troubleshooting Application Image Upgrade - H3C MSR 30-20 ROUTER Installation Manual

Reconfigure the parameters if their values are different.

Troubleshooting Application Image Upgrade

Symptom 1:
Symptom:
Start the router and upgrade the software using TFTP. The following is displayed:
boot device
unit number
processor number
file name
inet on ethernet (e) : 192.168.0.2
host inet (h)
user (u)
ftp password (pw)
flags (f)
Loading...
Done!
0 bytes downloaded.
Something wrong with the file.
Solution:
Fault occurs because the source file does not exist or the network cable is not connected, or the IP
address is not correct. Ensure that the source file is in the TFTP root directory and the cable is
connected securely and the IP address is correctly assigned.
Symptom 2:
Symptom:
Start the router and upgrade the software using TFTP. The following is displayed:
boot device
unit number
processor number
file name
inet on ethernet (e) : 192.168.0.2
host inet (h)
user (u)
ftp password (pw)
flags (f)
Loading...
Done!
11487495 bytes downloaded.
Something wrong with the file.
Solution:
: mottsec
: 1
: 0
: main.bin
: 192.168.0.1
: guest
: 123456
: 0x80
: mottsec
: 1
: 0
: main.bin
: 192.168.0.1
: guest
: 123456
: 0x80
7-2