H3C MSR 30-20 ROUTER Installation Manual page 52

HardWare Version is
CF Card is Inserted, now is mounting...
cf:/ - Volume is OK
Mount CF Card OK!
CF Card Size:256MBytes
Press Ctrl+B to enter extended boot menu...
Enter <Ctrl+B>, the system will enter the extended Boot ROM menu; otherwise, the system will enter
the program decompression process.
The system enters the Boot extended menu only if <Ctrl+B> is pressed immediately (within six seconds)
after the statement "Press Ctrl+B to enter extended Boot Menu..." appears. Otherwise, you will enter
the program decompression process. To re-enter the Boot extended menu during the decompression
process, you need to reboot the router.
The current starting file is main application file--cf:/main.bin!
The main application file is self-decompressing...
Decompressing...done!
System is starting.....
Ensure the baudrate is set to 9600bps!
Starting at 0x10000...
usrRoot() end
leave BSP
id=0x2000,proc=0xc6c888
.
......
......
......
.
id=0x1cfff000,proc=0xc7b6d4
User interface con0 is available.
Press ENTER to get started.
Press <Enter> and the screen will display:
<DEVICE>
This prompt indicates that the router has entered the user view, and now the router can be configured.
3.00
4-5