Upgrading Bootrom Through Serial Port - H3C MSR 30-20 ROUTER Installation Manual

The submenu is defined as follows:
Table 5-6 File control submenu
<1> Display All File
<2> Set Application File type
<3> Set Configuration File type
<4> Delete File
<5> Exit To Main Menu
BootROM operation submenu
Enter <7> under the main BootROM menu to enter the BootROM operation menu:
=====================<BOOT ROM OPERATION>====================
|Note:the operating device is CF Card
| <1> Backup Full Boot ROM
| <2> Restore Full Boot ROM
| <3> Update Full Boot ROM With XModem
| <4> Update Extended Boot ROM With XModem
| <5> Update Basic Boot ROM With XModem
| <6> Exit To Main Menu
| Note:When Update Full/Extended/Basic BootRom,they are the |
| same file
=============================================================
Enter your choice(1-6):
The submenu is defined as follows:
Table 5-7 BootROM operation submenu
<1> Backup Full Boot ROM
<2> Restore Full Boot ROM
<3> Update Full Boot ROM With XModem
<4> Update Extended Boot ROM With XModem
<5> Update Basic Boot ROM With XModem
<6> Exit To Main Menu

Upgrading BootROM Through Serial Port

Use XModem to upgrade BootROM through serial port.
Menu item
Menu item
Display all files.
Set application file type.
Set configuration file type.
Delete files.
Exit to the main BootROM menu.
|
|
|
|
|
|
|
|
Backup full BootROM.
Restore full BootROM.
Upgrade full BootROM through XModem.
Update extended BootROM through XModem.
Update basic BootROM through XModem.
Exit to the main BootROM menu.
5-8
Description
Description