H3C MSR 30-20 ROUTER Installation Manual page 71

No TFTP/FTP Server is available with the MSR 30 series. You must install one yourself.
Step 2: Modify Ethernet parameters. Refer to section "Configuring Ethernet Parameters" for details.
Step 3: Enter <3> to enter Ethernet submenu. For example, when upgrading main application program,
enter <2> to upgrade:
Loading...
Done!
14323376 bytes downloaded.
Input the File Name:
After the download is done, input the file name and begin to update:
Updating File main.bin........
Update Success!
Step 4: Enter <6> to exit to the main BootROM menu. Enter <1> to boot from the CF card.
Step 5: Set the updated application program to be the main boot file, i.e. the default boot file of the
system.
Application program does not exist.
Now starting to download application program.
==================<EXTENDED-BOOTROM MENU>====================
| <1> Boot From CF Card
| <2> Enter Serial SubMenu
| <3> Enter Ethernet SubMenu
| <4> File Control
| <5> Modify Bootrom Password
| <6> Ignore System Configuration
| <7> Boot Rom Operation Menu
| <8> Clear Super Password
| <9> Device Operation
| <a> Reboot
=============================================================
Enter your choice(1-a):4
The system reboots. Enter <4> when it prompts the above information.
========================<File CONTROL>=======================
|Note:the operating device is CF Card
| <1> Display All File
| <2> Set Application
| <3> Set Configuration File type
| <4> Delete File
| <5> Exit To Main Menu
=============================================================
Enter your choice(1-5):2
Enter the file control submenu and enter <2> to set the application file type.
File type
5-15
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|