Side Covers - Removing And Replacing - IBM 4851 514 Planning, Installation And Service Manual

Removing and replacing FRUs
Figure 58. Removing tower center cover
To replace, reverse the removal procedure.
Side covers – removing and replacing
1. Remove the tablet. See "Display tablet – removing and replacing" on page 55.
2. Remove the HDD front cover. See "HDD cover – removing and replacing" on
3. Remove the top cover. See "Top cover – removing and replacing" on page 70.
4. Remove the center cover "Tower center cover – removing and replacing" on
5. From the front of the system, use a flat-bladed screwdriver to pry open four
6. Pull the side cover toward the rear and remove.
72
SurePOS 500 Model 514
page 73.
page 71.
latches on the front of each side cover A , as shown in Figure 59 on page 73.
Updated October, 2008