Chapter 2. Installing The Ibm Surepos 500 Model 514; Rear View And Connectors - IBM 4851 514 Planning, Installation And Service Manual

Updated October, 2008

Chapter 2. Installing the IBM SurePOS 500 Model 514

Rear view and connectors . . . . . . . . . . . . . . . . . . . . . 5
Installation steps . . . . . . . . . . . . . . . . . . . . . . . . . 6
Installing the optional features . . . . . . . . . . . . . . . . . . . . 6
Attaching the I/O cables
Powering on and the LED states . . . . . . . . . . . . . . . . . . 14
Using the setup utility . . . . . . . . . . . . . . . . . . . . . . 14
Calibrating the touch screen . . . . . . . . . . . . . . . . . . . . 15
This section describes procedures for setting up the SurePOS 500 Model 514
product. You should be familiar with the connectors of the IBM 4851 before you
begin the installation steps.

Rear view and connectors

Figure 3 shows the SurePOS 500 Model 514 connectors.
Figure 3. IBM 4851 connectors
© Copyright IBM Corp. 2005, 2008
Installing the memory modules
Installing the MSR . . . . . . . . . . . . . . . . . . . . . . . 8
Installing the integrated customer display . . . . . . . . . . . . . . . 9
Installing the wireless adapter enclosure
Routing and connecting cables to the rear connector panel
Table 4. Rear view connectors and icons
Reference Device Connector
A , B , C
Serial A, B, and C
D
24 volt USB
. . . . . . . . . . . . . . . . . . 6
. . . . . . . . . . . . . . 11
. . . . . . . . . . . . . . . . . . . . . 12
Icon
. . . . . . . 12
5