Appendix A. Field-Replaceable Units; How To Use The Parts Catalog - IBM 4851 514 Planning, Installation And Service Manual

Updated October, 2008

Appendix A. Field-replaceable units

| |

How to use the parts catalog

© Copyright IBM Corp. 2005, 2008
How to use the parts catalog . . . . . . . . . . . . . . . . . . . . 87
Assembly 1: SurePOS 500 (4851) Model 514
Assembly 2: Display tablet components . . . . . . . . . . . . . . . . 90
Assembly 3: Optional features . . . . . . . . . . . . . . . . . . . 92
Assembly 4: Countertop non-keyboard integration tray and filler panels . . . . 94
Assembly 5: Cash drawer non-keyboard integration tray and filler panels
Assembly 6: Countertop and cash drawer keyboard integration tray and filler
panels . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
Assembly 7: Mounting foot . . . . . . . . . . . . . . . . . . . . 100
Line cord assemblies . . . . . . . . . . . . . . . . . . . . . . 102
This parts listing contains reference drawings and a corresponding index for all field
replaceable parts. The index provides the part number, the quantity required (units),
and a description of the part.
Listed below is additional information about the parts assembly index.
SIMILAR ASSEMBLIES
If two assemblies contain a majority of identical parts, they are broken down
on the same list. Common parts are shown by one index number. Parts
specific to one or the other of the assemblies are listed separately and
identified by description.
AR (As Required) in the Units column indicates that the quantity is not the
same for all machines.
NP (Non-Procurable) in the Units column indicates that the part is
non-procurable and that the individual parts or the next higher assembly
should be ordered.
NR (Not Recommended) in the Units column indicates that the part is
procurable, but not recommended for field replacement, and that the next
higher assembly should be ordered.
R (Restricted) in the Units column indicates the part has a restricted
availability.
INDENTURE
The indenture is marked by a series of dots located before the parts
description. The indenture indicates the relationship of a part to the next
higher assembly.
No Dot
One Dot
One Dot
Two dots
Two dots
Three dots
Main assembly
Detail parts of a main assembly
Subassembly of the main assembly
Detail part of a one-dot subassembly
Subassembly of a one-dot subassembly
Detail part of a two-dot subassembly
. . . . . . . . . . . . . 88
. . . 96
87