Mounting the SurePOS 500 Model 514
Figure 24. Attaching filler panels and the rear modesty cover
14. Attach the distributed customer display D to the cash drawer with two
15. Close the cash-drawer rear cover.
16. Plug the AC power cords for the printer and the system into an AC outlet.
17. After your installation is complete, press the printer power switch under the
18. Switch ON the power to the SurePOS 500 Model 514. Verify that the system is
19. Install your software. Refer to IBM SurePOS Model 514 Operating System
32
SurePOS 500 Model 514
thumbscrews F and snap the entire unit into place at the rear of the tray.
printer cover to power on the printer.
operating correctly by checking the indicator lights (LEDs) on the front of the
system. See "Powering on and the LED states" on page 14.
Installation Guide.
Updated October, 2008