Mounting the SurePOS 500 Model 514
17. Install your software. Refer to IBM SurePOS Model 514 Operating System
Installing filler panels without a printer
For systems without a printer:
1. Install the mounting plate in the center of the base using the removable
2. Install printer panel G first and use filler panels K to lock in filler panel G
Cash drawer
You can mount the SurePOS 500 Model 514 on a full-size cash drawer by first
installing an integration tray on the cash drawer. Follow these steps:
Figure 21. Attaching the integration tray to cash drawer
28
SurePOS 500 Model 514
Installation Guide.
thumbscrews. See Figure 19 on page 26.
onto the tray.
1. To mount the integration tray onto the cash drawer:
a. Tilt the integration tray forward, and slide the tabs into the slots near the
front of the drawer. Lay the tray down on the cash drawer.
b. Attach the cash drawer integration tray to the cash drawer by tightening
two M6x8 screws A at the rear of tray, as shown in Figure 21.
Updated October, 2008
A