Intel SC5600LX - Server Chassis - Tower Service Manual page 6

Preface
/
NOTE
When installing either the Intel
a passive processor heat sink (FXXRGTHSINK) is required.
®
The Intel Server Chassis SC5600 family is compatible with the following Intel
backplane assemblies:
AXX6DRV3GR
AXX4DRV3GR
AXX6DRV3GEXP
AXX4DRV3GEXP
®
Your Intel Server Chassis SC5600 ships with the following items:
Single fixed 670-W power supply installed in the chassis (SC5600Base), or (1+1) Hot-swap
redundant 750-W power supply installed in the chassis (SC5600BRP and SC5600LX)
Three fixed fans installed in the chassis (Intel
Chassis SC5600BRP), or four hot-swap fans with fan cables installed in the chassis (Intel
Server Chassis SC5600LX)
Front control panel board and front control panel cable installed in the chassis
Front USB Panel and Front USB Panel cable installed in the chassis
Air duct installed in the chassis
Five rubber bumpers that support Intel
COM2 cable
Twenty (20) 6-32 screws for securing server/workstation board
Four M3 optical drive screws
Four cable ties
One cable clip
Four server/workstation board standoff spares
In addition, you may need or want to purchase one or more of the following accessory items for your server:
Processor
Memory DIMMs
Hard drive
CD-ROM or DVD-ROM drive
RAID controller
Operating system
vi
®
Server Board S5520HC or S5500HCV in the Intel
®
server/workstation board
®
Server Chassis SC5600LX,
®
hot-swap hard disk drive
®
Server Chassis SC5600Base, Intel
Server
Intel® Chassis SC5600 Service Guide
®
Server
®