Erasing the Local Configuration
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Default Settings
Setting (Default Value)
Administrator password
(**#)
End-user password
(7935)
Cisco IP Conference Station 7935 Administration Guide
3-14
Follow this procedure to restore the default settings.
Press the Menu button.
Press the Up or Down scroll button to select Admin Setup.
Press the Select button.
Enter the administrator password (the default administrator password is **#), and
press the Enter softkey.
Press the Down scroll button to select Restore Defaults.
Press the Select button.
The following message appears:
All settings and data will be lost. Including Phone Book Entries.
Press Yes to Confirm or No to Exit.
Press the Yes softkey to confirm the restore, or press the No softkey to exit.
A message appears confirming that the settings have been restored to the defaults
and the IP Conference Station will restart.
Note
You must hang up all calls before you can restart the
IP Conference Station.
The IP Conference Station default settings are provided in the following table.
Valid Options
-
-
Chapter 3
Configuration of the Cisco IP Conference Station 7935
Administrator-
User-
controlled
controlled
Y
N
Y
N
Notes
78-12727-03