Disabling Vlan - Cisco 7912G - IP Phone VoIP Administration Manual

Modifying VLAN Settings
Step 3
Step 4
Step 5
Step 6
Step 7
Step 8
Step 9

Disabling VLAN

Using the Phone Configuration Web Page (Cisco IP Phone Models 7902G/7905G/7912G)
Step 1
Cisco IP Phone Administration Guide for Cisco CallManager 3.3, Cisco IP Phones 7902G/7905G/7912G
4-26
From the Settings menu, use the Navigation button to select Network
Configuration, and then press the Select softkey.
From the Network Configuration menu, press **#.
If your phone displays "Enter Admin Password," enter your password and then
press the Enter softkey.
Make sure that an unlocked padlock icon appears in the upper-right corner of your
LCD.
Scroll to Admin. VLAN Id.
Press the Edit softkey.
Use the buttons on the keypad to enter the new Admin VLAN setting.
Use the << softkey to correct any mistakes.
Press Validat.
Press Save.
You can disable or enable VLAN manually.
Procedure
Open the Phone Configuration web page.
Open your web browser and enter the following URL, where IPaddress is the
a.
IP address of your phone
http://IPaddress
Press Enter.
b.
The Phone Configuration web page appears.
Chapter 4 Configuring Network Settings on the Cisco IP Phone
OL-6313-01