Cisco 7912G - IP Phone VoIP Administration Manual page 95

Chapter 4 Configuring Network Settings on the Cisco IP Phone
Step 2
Step 3
Step 4
Using the Phone's Network Configuration Screen (Cisco IP Phone Models 7905G/7912G)
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Step 7
Cisco IP Phone Administration Guide for Cisco CallManager 3.3, Cisco IP Phones 7902G/7905G/7912G
OL-6313-01
In the pane on the left under Change Configuration, click Network Parameters.
You may be prompted to enter a password.
The Network Parameters web page appears.
To enable VLAN, in the OpFlags field, change bit 5 to 0 (zero).
To disable VLAN, in the OpFlags field, change bit 5 to 1.
For more information about this field, see OpFlags parameter in
page A-12.
Click Apply.
Procedure
Press the Menu button.
Use the Navigation button to select Settings, and then press the Select softkey.
From the Settings menu, use the Navigation button to select Network
Configuration, and then press the Select softkey.
From the Network Configuration menu, press **#.
If your phone displays "Enter Admin Password," enter your password and then
press the Enter softkey.
Make sure that an unlocked padlock icon appears in the upper-right corner of your
LCD.
Scroll to VLAN Enabled.
If VLAN is enabled, the option appears as
VLAN Enabled YES
Press the No softkey to disable VLAN.
Press Save.
Modifying VLAN Settings
Table A-1 on
4-27