Cisco 7912G - IP Phone VoIP Administration Manual page 167

Appendix A Additional Configuration Methods, Parameters, and Procedures
Step 3 Add the following line to the Cisco IP Phone profile file.
Note
upgradelogo: imageID , TFTPServerID , image .logo
where:
•
•
•
For example, if the image identifier is 10, the converted file is stored on the same
TFTP server as the Cisco IP Phone configuration file, and the base name of the
converted image file is mylogo, add the following line to the configuration file:
upgradelogo:10,0,mylogo.logo
Use the cfgfmt.exe tool to generate a binary profile file from the text file.
Step 4
Put the binary file in these locations:
•
•
Note
Power cycle the phone.
Step 5
The new graphic appears when the phone restarts.
Cisco IP Phone Administration Guide for Cisco CallManager 3.3, Cisco IP Phones 7902G/7905G/7912G
OL-6313-01
For detailed information about using profile files, see the
Configuring" section on page
imageID is the same unique identifier that you specified in
TFTPServerID is the IP address of the TFTP server on which the image.logo
file is stored. If the image.logo file is stored on the same TFTP server as the
Cisco IP Phone configuration file, replace TFTPServerID with the numeral 0.
image is the base file name of the image file.
The root directory on the TFTP server (C:\Program Files\cisco\tftppath)
The network locale directories on the TFTP server for each language that is
supported by Cisco CallManager.
The default network locale directory on the TFTP server is C:\Program Files\
cisco\tftppath\United_States.
For detailed information about using the cfgfmt.exe tool, see the
a Profile File and Converting it to Binary Format" section on page
Changing the Logo on the Cisco IP Phone LCD Screen
A-2.
"TFTP
Step 1.
"Editing
A-5.
A-29