Accessing Network Configuration Settings Through A Phone's Web Page - Cisco 7912G - IP Phone VoIP Administration Manual

Chapter 4 Configuring Network Settings on the Cisco IP Phone
Step 1
Step 2
Step 3
Step 4
Step 5
Step 6
Accessing Network Configuration Settings through a Phone's
Web Page
Cisco IP Phone Administration Guide for Cisco CallManager 3.3, Cisco IP Phones 7902G/7905G/7912G
OL-6313-01
To unlock network settings on the Cisco IP Phone models 7905G/7912G, follow
these steps.
Procedure
Press the Menu button.
Use the Navigation button to select Settings, and then press the Select softkey.
Use the Navigation button to select Network Configuration, and then press the
Select softkey.
From the Network Configuration menu, press **#.
If your phone displays "Enter Admin Password," enter your password and then
press the Enter softkey.
Look at the upper-right portion of your LCD.
• Locked—The icon appears as a locked padlock.
Unlocked—The icon appears as an unlocked padlock.
•
The following sections include instructions for setting configuration options
using a phone's web page. To set configuration options in this way, you must first
use the UIPassword parameter in the phone's profile file to set up a password. If
you do not set up a password, you will not be able to change network settings, and
Apply will not be available.
For more information about the UIPassword parameter, see
page A-21.
Configuring Methods
Table A-4 on
4-3