Cisco 7912G - IP Phone VoIP Administration Manual page 53

Chapter 2 Preparing to Install the Cisco IP Phone on Your Network
Use auto-registration to quickly get all phones into the Cisco CallManager
database. You can then modify any settings, such as the directory numbers, from
Cisco CallManager. If you do not use auto-registration, you must manually add
phones to the Cisco CallManager database or use the Bulk Administration Tool
(BAT).
Use the following procedure as a starting point to enable auto-registration using
the Cisco CallManager Administration application. For additional information,
access context-sensitive help from the application or refer to Cisco CallManager
documentation.
Procedure
Log in to the Cisco CallManager Administration application.
Step 1
From the menu bar, choose System > Cisco CallManager.
Step 2
The Cisco CallManager Configuration window appears.
Verify that the "Auto-registration disabled on this Cisco CallManager" setting is
Step 3
not checked. Cisco CallManager disables the auto-registration by default to
prevent unauthorized connections to the network.
Step 4 To modify phone settings, choose Device > Phone. Use the Find and List Phones
window to enter search criteria for each phone.
Step 5 Install the phone by following the instructions in
Cisco IP Phone."
To configure additional phone features, see the
Step 6
Using Cisco CallManager Administration" section on page 5-2
Related Topics
•
•
•
Cisco IP Phone Administration Guide for Cisco CallManager 3.3, Cisco IP Phones 7902G/7905G/7912G
OL-6313-01
Adding Phones Manually, page 2-14
Using the Bulk Administration Tool, page 2-17
Configuring Telephony Features Using Cisco CallManager Administration,
page 5-2
Adding Phones to the Cisco CallManager Database
Chapter 3, "Installing the
"Configuring Telephony Features
for details.
2-13