Device Information; Network Configuration - Cisco 7912G - IP Phone VoIP Administration Manual

Web Page Configuring

Device Information

Note

Network Configuration

Cisco IP Phone Administration Guide for Cisco CallManager 3.3, Cisco IP Phones 7902G/7905G/7912G
A-8
Appendix A
• Tone Parameters, page A-16
Audio Parameters, page A-19
•
The Device Information area of the Cisco IP Phone web page displays the
following information about a phone:
• MAC address—Unique Media Access Control (MAC) address of the phone
Host name—Unique host name assigned to the phone
•
Phone DN—Directory number assigned to the phone
•
• App Load ID—Identifier of the firmware running on the phone
Boot Load ID—Identifier of the factory-installed load running on the phone
•
• Software version—Version of the software running on the phone
Hardware revision—Version of the phone hardware
•
Serial number—Serial number of the phone
•
• Product ID—Product identifier of the phone
Hardware features—Reserved for future use
•
• BTXML cards version—Version of the graphics card in the phone
You can access the Device Information area directly from a web browser by
entering this URL: ip-address/DeviceInformation, where ip-address is the IP
address of the phone.
The Network Configuration area of the Cisco IP Phone web page displays the
following information about a phone:
DHCP server—If DHCP is enabled, the DHCP server that the pone contacts.
•
• BOOTP server—Not used.
MAC address—Unique MAC address of the phone.
•
Additional Configuration Methods, Parameters, and Procedures
OL-6313-01