Specifying Firmware Upgrade Instructions For The Cisco Ip Phone - Cisco 7912G - IP Phone VoIP Administration Manual

Appendix A Additional Configuration Methods, Parameters, and Procedures
Table A-4 Profile File Parameters
Parameter Description
UIPassword Password for accessing the
phone's Change
Configuration web pages or
to unlock the phone's
Network Configuration
screen for editing.
upgradecode Provides information for
upgrading the firmware on
the phone.
upgradelogo Allows you to specify the
graphic that appears on the
phone's LCD screen.
Specifying Firmware Upgrade Instructions for the
Cisco IP Phone
Cisco IP Phone Administration Guide for Cisco CallManager 3.3, Cisco IP Phones 7902G/7905G/7912G
OL-6313-01
You can use the upgradecode parameter in a profile file to provide special upgrade
instructions to the Cisco IP Phone models 7902G/7905G/7912G. To provide
upgrade instructions in this way, add the following line to the Cisco IP Phone
profile file:
upgradecode:3, type ,0x0400,0x0100, tftp_server_ip ,69, image_id ,
image_file_name
where:
type is 0x401 for the Cisco IP Phone 7902G, 0x501 for the Cisco IP Phone
•
7905G, or 0x601 for the Cisco IP Phone 7912G.

Specifying Firmware Upgrade Instructions for the Cisco IP Phone

Usage
Alphanumeric string up to nine characters.
If set to 0, no password is required.
After a password is set with this parameter, the
password can be changed from the phone's web
page. For more information, see the
Configuring" section on page
Note Changing a password from the phone's web
page does not change the password in the
profile file. If the phone downloads the
profile file, the password will be reset as
specified in the profile file.
See the "Specifying Firmware Upgrade Instructions
for the Cisco IP Phone" section on page
See the "Changing the Logo on the Cisco IP Phone
LCD Screen" section on page
"Web Page
A-6.
A-21.
A-27.
A-21