Chapter 4
Configuring Network Settings on the Cisco IP Phone
Configuring IP Settings
Note
Assigning an IP Address
Cisco IP Phone Administration Guide for Cisco CallManager 3.3, Cisco IP Phones 7902G/7905G/7912G
OL-6313-01
Use these guidelines when manually configuring the IP settings:
•
You can use 0.0.0.0 for the subnet mask only if the default gateway is also
0.0.0.0.
•
Ensure the TFTP server has an IP address.
Ensure the default gateway IP address is on the same subnet as the host IP
•
address.
Procedures involved in configuring IP settings or TFTP options cannot be
completed when DHCP is enabled in your network.
This section covers the following topics:
•
•
•
•
•
The IP address is the unique logical address identifying each host computer, or
node, on a TCP/IP network. An IP address is a 32-bit number expressed as four
decimal numbers from 0 to 255 separated by periods.
Before you can assign an IP address, you must disable DHCP. For instructions,
see the
"Disabling DHCP" section on page
Configuring IP Settings
4-11.
4-15