Selecting From The Panel - Yamaha Electone STAGEA ELS-01C Owner's Manual

By selecting [PRESET] in the list, the original (factory) effect category for the selected
4
Voice is automatically set. Selecting [THRU] bypasses the effect (no effect is added to
the selected Voice).
2
TYPE 1 (Page 3)/ TYPE 2 (Page 4)
Determines the type of the effect. Pressing the TYPE button on the display calls up the
effect type list, corresponding to the selected effect category. Select the desired effect
type in the list, then press [CLOSE] on the upper right in the display to close the list.
If you have selected the [PRESET] category, the effect type cannot be edited.
After changing the effect type, the effect parameter below is automatically changed
corresponding to the selected effect type.
3
Effect Parameters
Effect parameters are displayed corresponding to the selected effect type.
2

Selecting from the panel

The Reverb, Sustain and Rotary Speaker displays are called up by pressing the
respective buttons on the panel.
Reverb
Reverb adds an echo-like effect to the sound, giving the impression of a performance in
a large room or concert hall. You can adjust the reverb volume for each Voice sections,
or adjust the reverb volume for rhythm and accompaniment separately.
To adjust the reverb effect and call up the Reverb
REVERB
pages:
MAX
Press one of the REVERB buttons, located to the left of the panel,
to set the Reverb effect. The Reverb display appears.
The Reverb display consists of four pages.
MIN
ELS-01/01C/01X Owner's Manual 43