Initializing Registration Memory; Registration Shift - Yamaha Electone STAGEA ELS-01C Owner's Manual

Reference Page
Factory Set (Initializing the
Electone); (page 21)
6
84 ELS-01/01C/01X Owner's Manual
4

Initializing Registration Memory

Deleting all Registration data in Registration Memory initializes the Registration
Memory. Be careful when using this operation, since it erases all your existing data.
In order to avoid inadvertently losing your important data, save it to an external storage
device.
1
Press the [UTILITY] button on the panel to call up the GLOBAL
Page in the Utility display.
DISPLAY SELECT
VOICE A.B.C.
DISPLAY M.O.C. MDR
FOOT
UTILITY INTERNET
SWITCH
RHYTHM
PROGRAM
VOICE EDIT PATTERN SEQUENCE
U.ORGAN L.ORGAN ROTARY SP
FLUTES
FLUTES SPEED
2
Press the INITIALIZE [EXECUTE] button on the right side in the
display.
The message "Are you sure you want to initialize Registration data?" appears.
Press [INITIALIZE] to actually initialize the data. When the operation is
complete, the Electone will be restarted.
Press [CANCEL] to cancel the operation.
5

Registration Shift

The Registration Shift function allows you to change Registrations without taking your
hands from the keyboards. By using the Right Footswitch on the expression pedal, you
can "jump" to a specified Registration or step through the panel Registrations in
sequence, either in numeric order or in any order you specify.
Registration Shift has three modes: Shift, Jump and User. These are set in the Regist
Shift display. You can also view and check the Registration Shift mode in the Voice
Display.