Table of Contents
Advertisement
Selecting from the Panel
3 Effect Parameters
Effect parameters are displayed corresponding to the
selected effect type.
Voice Condition [Page 5]
1
2
1 TRANSPOSE
Changes the pitch in semitones for each Voice section.
Range is from -6 to +6.
Reference page
• Transpose (for entire instrument); (page 184)
2 TUNE
Determines the fine pitch settings (detune) for each Voice
section, producing a richer sound. Each step represents a
1-cent change in pitch.
Range: -64 – +63
Reference page
• Pitch (for entire instrument); (page 184)
Selecting from the Panel
The Reverb, Sustain, Brilliance and Rotary Speaker
displays are called up by pressing the respective buttons
on the panel.
Reverb
Reverb adds an echo-like effect to the sound, giving the
impression of a performance in a large room or concert
hall. You can adjust the reverb volume for each Voice
sections, or adjust the reverb volume for rhythm and
accompaniment separately.
To adjust the reverb effect and call up
the Reverb pages:
Press one of the REVERB buttons, located to the left of
the panel, to set the Reverb effect. The Reverb display
appears.
REVERB
MAX
MIN
The Reverb display consists of four pages.
REVERB [Page 1]
DEPTH:
Fine adjustment of the depth of reverberation or the level
of the reflected sounds. Coarse reverb depth settings are
made with the panel REVERB buttons. The REVERB
buttons let you make coarse adjustment in seven settings
to the reverb depth while the slider gives you fine control.
When this parameter or the panel REVERB control is set
to the minimum, the settings in the pages that follow
have no effect.
Range: 0 – 24
Page 46
Advertisement
Table of Contents
