Changing The Rhythm Volume - Yamaha Electone STAGEA ELS-01C Owner's Manual

To use the Break patterns:
As you play the Electone along with the rhythm, occasionally press the [BREAK]
button.
Moreover, you can start/stop the rhythm and switch the sections by using the
Footswitch. See page 181 for details.

Changing the rhythm volume

There are two ways to set the rhythm volume: using the VOLUME buttons on the
panel and using the volume slider in the display. The volume buttons let you make
coarse adjustments to the volume while the slider gives you fine control.
Using VOLUME buttons on the panel (coarse):
Press one of the VOLUME buttons of the rhythm on the panel to set the desired level.
The buttons have seven volume settings, from a minimum of 0, or no sound, to a
maximum of full volume.
SEQ. SEQ.
1 2
SEQ. SEQ.
3 4
Using VOLUME slider in the display (fine):
Pressing the same rhythm button on the panel again (or pressing the rhythm name of
the selected rhythm in the display) calls up the Rhythm Condition Display.
To set the volume, touch the PERCUSSION VOLUME slider in the display or use the
Data Control Dial. The control range is from 0 (no sound) to 24 (full volume).
SYNCHRO START
BREAK
START
RHYTHM
MARCH WALTZ SWING& POPS R & B
JAZZ
LATIN WORLD BALLAD ROCK DANCE
MUSIC
VOLUME
MAX
1
2
MIN
DATA CONTROL
Depending on the volume
value (set by the slider), two
adjacent VOLUME button
lamps may be lit at the same
time, indicating an
intermediate position.
ELS-01/01C/01X Owner's Manual
5
NOTE
55