Selecting From The Panel; Reverb - Yamaha Electone STAGEA ELB-02 Owner's Manual

Once the Rotary Speaker effect has been turned on and set, you can control the
effect in real time from the panel (in UTILITY) or conveniently from the Left
Footswitch.
3
Control the Rotary Speaker effect from the panel or from the Left
Footswitch.
You can control Rotary Speaker on/off not only from the panel (Speed Control
parameter in UTILITY, Page 3), but also by using the Left Footswitch, if the
Footswitch has been properly assigned.
See "4 Rotary Speaker" on page 180 for details.
2

Selecting from the panel

The Reverb and Sustain displays are called up by pressing the respective buttons on the
panel.

Reverb

                                     
Reverb adds an ambient echo-like effect to the sound, giving the impression of a
performance in a large room or concert hall. You can adjust the reverb volume for the
entire system.
To adjust the reverb effect and call up the Reverb pages, press one of the REVERB
buttons, located to the left of the panel, to set the Reverb effect. The Reverb display
appears.
The Reverb display consists of two pages.
[Page 1] Reverb Display
1
2
3
61
ELB-02 Owner's Manual
3