Controlling The Electone From An External Device; Connecting Usb Storage Devices Or Usb-Lan Adapter - Yamaha Electone STAGEA ELS-01C Owner's Manual

Controlling the Electone from an External Device

You can use an external MIDI keyboard or sequencer to remotely play the sounds of
your Electone and change its Registrations. (You will need to set the MIDI transmit
channels of the MIDI keyboard to match the fixed receive channels on your Electone.)
MIDI terminals are automatically disabled when the USB TO HOST terminal is used.

Connecting USB storage devices or USB-LAN adapter

Using the USB TO DEVICE terminal(s), you can connect USB storage devices (such
as the UD-FD01 floppy disk drive) for saving your Electone data, and/or a USB-LAN
adapter for direct connection to the Internet.
Compatible USB devices
You can connect a single USB-LAN adapter and up to two USB storage devices (such
as floppy disk, hard disk, flash disk and other drives) to the USB TO DEVICE
terminal(s). Before purchasing a USB-LAN adapter or USB storage devices, please
consult your Yamaha dealer, or an authorized Yamaha distributor for advice, or see the
Yamaha website (http://www.global.yamaha.com/).
Precautions when using the USB TO DEVICE terminals
• Never turn the USB device's power on/off and never plug/unplug the USB
cable when the connected USB storage device is of the self-powered type.
Doing so may result in the operation of the Electone "freezing" or hanging
up.
• While the instrument is accessing data (such as Save, Load, and Delete
operations), do NOT unplug the USB cable, do NOT remove the media
from the device, and do NOT turn the power off to either device. Doing so
may corrupt the data on either or both devices.
MIDI keyboard or synthesizer
MIDI IN MIDI OUT
MIDI cable
MIDI messages
NOTE
When you are using the
M.D.R., MIDI data cannot be
received.
MUSIC PRODUCTION SYNTHESIZER
Reference Pages
Installing the Floppy Disk
Drive (page 221)
Internet Direct Connection
(page 189)
Formatting External Media
(page 95)
NOTE
If necessary, use a USB hub.
Only self-powered (battery or
external power supply) types
can be used. On the ELS-01,
USB hubs of up to two levels
can be used; on the ELS-
01C/01X, only one level can
be used.
ELS-01/01C/01X Owner's Manual
1 3
211