Playing Rhythm Sequences; Playing All Sequences In Order - Yamaha Electone STAGEA ELS-01C Owner's Manual

9
178 ELS-01/01C/01X Owner's Manual

Playing Rhythm Sequences

To play any of the rhythm sequences you have created:
1
Press the appropriate Sequence button ([SEQ. 1] – [SEQ. 4]) on
the panel.
The SEQ button's lamp lights.
SEQ. SEQ.
1 2
SEQ. SEQ.
3 4
2
Press the rhythm [START] button.
The rhythm in the selected sequence starts playback.
When one of the four rhythm sequences is playing, each programmed rhythm
that plays is indicated by the lit LED of the Rhythm buttons.
The Registration Memory also changes with the Rhythm Sequence playback,
if the sequence includes a Registration Sequence.
Rhythm playback automatically stops when the sequence reaches its end.
If you've stopped rhythm playback in the middle of the sequence, press the
[START] button again to resume playback.

Playing All Sequences in Order

You can also have up to all four rhythm sequences automatically play in order, one after
another.
1
Press the desired Sequence buttons, making sure that all their
LEDs are lit.
2
Press the rhythm [START] button.
The rhythm sequences start from the lowest number and play in order
automatically to the highest number. (For example, if you press Sequence
buttons 4, 2 and 1 in that order, the sequences will be played back not in the
order you pressed them, but in their numeric order: 1, 2, then 4.) This function
effectively allows you to make a long rhythm sequence that exceeds the 140-
pattern memory limit of a single sequence.
Pressing one of the SEQ. buttons while a Rhythm Sequence is playing back
automatically cancels the pressed sequence, and its LED turns off. You cannot
cancel a sequence that is currently playing. The SEQ. lamp goes out when the
sequence assigned to it is finished playing.
RHYTHM
MARCH WALTZ SWING& POPS R & B
JAZZ
LATIN WORLD BALLAD ROCK DANCE
MUSIC
VOLUME
MAX
1
2
MIN