Yamaha Electone STAGEA ELS-01C Owner's Manual page 47

Sustain
The sustain effect, selectable for the Upper, Lower and Pedal Voices, causes Voices to
gradually fade out when the keys are released. The sustain on/off and sustain length
settings are independent for each keyboard, providing maximum expressive control.
The Knee Lever can also be used to switch the sustain on/off. Sustain cannot be applied
to the Lead Voices.
To add sustain to the Voices and call up the Sustain
Length page:
Press one of the SUSTAIN buttons, located to the left of the panel,
to set the sustain. The Sustain Length display appears.
The lamp of the button lights up to indicate that sustain is on. Press
the button again to turn sustain off and the lamp turns off. When
the lamp is off, sustain does not affect the corresponding keyboard.
Remember to check whether the sustain button lamps are on or off
before you start to play.
SUSTAIN LENGTH Display
The display shows the current sustain length values for each keyboard. The values here
must be set high enough for the sustain effect to be noticeable.
Range: 0 – 12
Brilliance
Adjustment of the Voice tone, brighter or mellower.
Press the BRILLIANCE buttons of each Voice section on the panel to set the desired
brilliance for each Voice.
The buttons have seven brilliance settings.
STRINGS BRASS
PIANO ORGAN
UPPER KEYBOARD VOICE 1
WOOD-
TUTTI PAD SYNTH
WIND
PERCUS- GUITAR CHOIR WORLD
SION
SUSTAIN
UPPER
(KNEE)
LOWER PEDAL
(KNEE)
BRILLIANCE VOLUME
BRILLIANT MAX
1
2
MELLOW MIN
ELS-01/01C/01X Owner's Manual
Reference Page
Knee Lever (page 183)
47
4