Yamaha Electone STAGEA ELS-01C Owner's Manual page 106

7
106 ELS-01/01C/01X Owner's Manual
To delete the entered character:
1
Move the cursor to the character you want to delete.
Cursor
2
Press the [DELETE] button at the bottom right in the display.
The character is deleted.
To convert into kanji (Japanese language):
This applies only if you are using the
1
When the input "Hiragana" characters are shown in the reverse
display (highlighted), press the
one or several times to convert to the characters into the
appropriate kanji.
• The reversed area can be changed by the [E][F] buttons in the display or
the Data Control dial.
• The converted area can be cleared at once by pressing the
button.
2
To actually enter the change, press the [OK] button or enter the
next character. To enter the hiragana character itself (without
converting it), press the
A "name is not available" message may appear when you press the [OK] button to
finish entering the name. If this message appears, the name is invalid and you
should enter another name.
The following names cannot be used. ("xx" indicates numbers.)
MDR_xx.EVT ELS_SONG.NAM
MDR_xx.MID MDR_xxx.MID
MDR_xx.Bxx REG_xxx.B00
MDR_xx.Vxx SONG_xxx.C02
SONG.NAM
DATA CONTROL
or
(Kana-Kan) button in Japanese.
(kanji-conversion) button
(delete) button.
MDR_xxx.TMP TMP
REG_xxx.TMP TMP.E02
ELS_SONG.TMP
(cancel)