Yamaha Electone STAGEA ELS-01C Owner's Manual page 117

4
Select the desired song for playback.
5
Press the [F] (Play) button in the display to start song
playback.
The following display appears, letting you set the volume or mute settings for
each part.
1
PART buttons
Sets the each part for playback or mute (off ). Each press of the button toggles between
PLAY and OFF.
2
XG VOLUME
Adjusts the volume of the XG song within a range of 0 – 100. To set the volume, touch
the slider in the display directly or use the Data Control dial.
3
PART SETUP
Determines the volume balance of the parts. Pressing this button calls up the following
display.
You can adjust the volume of each part within a range of 0 – 100. Use the ALL slider to
adjust the volume of the XG song (the same function as XG VOLUME above).
Each channel button below each slider (for example, the [CH1] button) lets you set the
part to mute or play (the same function as the PART buttons above).
3 1 2
ELS-01/01C/01X Owner's Manual
7
117