Knee Lever; Controlling Rotary Speaker; Controlling Sustain - Yamaha Electone STAGEA ELS-01C Owner's Manual

Controlling Rotary Speaker

You can control the Rotary Speaker effect (on/off ) by using the Left Footswitch.
When the [Rotary Speaker] button is selected in this display and you press the
Footswitch, the Rotary Speaker effect is switched on or off. This function corresponds
to the [ROTARY SP SPEED] button on the panel. To use this function, you'll need to
make the appropriate Rotary Speaker settings for each Voice section or Organ Flute
Voice. For details, see page 48.
2

Knee Lever

The Knee Lever, located on the underside of the keyboard panel, can be used to turn
one of the following on and off: Sustain effect, Melody On Chord function, Lead Slide
effect, or Solo function.

Controlling Sustain

You can control on/off status of sustain for the Upper and Lower keyboards by using
the Knee Lever. Sustain for the Pedalboard cannot be controlled.
1
Make sure that the Upper and/or Lower Sustain
buttons have been turned on.
2
Fold the Knee Lever down.
Sustain is off when the Knee Lever is folded down.
Folding down
Reference Page
Rotary Speaker (page 48)
SUSTAIN
Reference Page
UPPER
(KNEE)
Sustain (page 47)
LOWER PEDAL
(KNEE)
ELS-01/01C/01X Owner's Manual
10
183