Replacing Registrations - Yamaha Electone STAGEA ELS-01C Owner's Manual

7
108 ELS-01/01C/01X Owner's Manual
3
Press the lowest blank (empty) Registration button.
4
Press the [SAVE] button.
The Registration data will be added.
When you play back this song, the top Registration in this display will be loaded
to the Electone. You can also change the order of the Registration data. See page
109.

Replacing Registrations

The M.D.R. also lets you change the Registrations of an existing song without
changing the performance data. In advance, you need to create the original Registration
that will replace the old one.
1
Select the song for which you wish to replace the Registrations.
For details on selecting a song, see page 96.
2
Press the [REGIST EDIT] button in the SONG SELECT Page to
call up the Regist Edit display.
The Registration data which has been saved to the song is shown.
3
Select the Registration data you wish to replace.
4
Press the [SAVE] button.
A message appears, prompting confirmation of overwriting the Registration
data. Select [OK] to overwrite (replace), or select [CANCEL] to abort the
operation.