11
Transpose and Pitch Controls
There are two pitch-related controls on the Electone: Transpose and Pitch. Transpose allows
you to change the key of the instrument and Pitch lets you finely adjust the tuning.
Transpose and Pitch can be adjusted in the Utility display. (The settings here cannot be
recorded to the Music Data Recorder.)
NOTE
The Transpose setting here is
not applied to an XG Song
(page 116).
11
188
ELS-01/01C/01X Owner's Manual
1
Press the [UTILITY] button.
The Utility display appears.
2
Press the [PITCH] button at the top right of the display to call up
the PITCH Page.
DISPLAY SELECT
VOICE
A.B.C.
DISPLAY
M.O.C.
MDR
FOOT
SWITCH
UTILITY
INTERNET
RHYTHM
PROGRAM
VOICE EDIT PATTERN SEQUENCE
U.ORGAN
L.ORGAN
ROTARY SP
FLUTES
SPEED
FLUTES
In this display, you can change the Transpose and Pitch settings by using the
buttons on the display or the Data Control Dial.
1
TRANSPOSE
Determines the coarse pitch setting of all the Voices, and is adjustable in half-steps
(semitones).
Range: -6 – +6
2
PITCH
Determines the fine pitch setting of all the Voices. Each step changes the pitch by
0.2 Hz. The default Pitch is 440.0 Hz (corresponding to key A3).
Range: 427.2 Hz – 452.6 Hz
You can also change the Transpose and Pitch for each Voice section, in the Voice
Condition display. For more information, see page 42.
1
2