Yamaha Electone STAGEA ELS-01C Owner's Manual page 130

8
130 ELS-01/01C/01X Owner's Manual
Editing an AWM Voice
You can edit an AWM Voice on the AWM Page and LAYER Page in the Voice Edit
display. In the AWM Page, the tonal balance of the entire Voice can be corrected by
some EQ parameters. In the LAYER Page, you can make detailed edits to each
Element.
AWM Page
1
2
1
Element On/Off switches
The [AWM1] – [AWM4] buttons indicate the Elements which make up the selected
Voice, and the [VA] button indicates the VA tone generator (the VA button is grayed
out when you are editing an AWM Voice). You can mute any of the Elements by simply
pressing the corresponding button. Pressing the button again cancels the mute.
2
EQ LOW FREQ./EQ LOW GAIN
Sets the frequency and gain (level) of the low frequency band. The EQ LOW FREQ.
slider sets the desired frequency band over a range of 32 Hz – 2.0 kHz. The EQ LOW
GAIN slider sets the level for the frequency band (specified by the EQ LOW FREQ.
slider) over a range of -12 dB – +12 dB.
3
EQ HIGH FREQ./EQ HIGH GAIN
Sets the frequency and gain (level) of the high frequency band. The EQ HIGH FREQ.
slider sets the desired frequency band over a range of 500 Hz – 16.0 kHz. The EQ
HIGH GAIN slider sets the level for the frequency band (specified by the EQ HIGH
FREQ. slider) over a range of -12 dB – +12 dB.
EQ (Equalizer)
Usually an equalizer is used to correct the sound output from amps or speakers to
match the special character of the room. The sound is divided into several frequency
bands, then by raising or lowering the level for each band, the correction is made.
This Electone has a two-band (high and low) digital equalizer that lets you adjust
the overall sound according to the type of music you play — classical music being
more refined and soft, pop music more crisp, and rock music more dynamic.
3