Yamaha Electone STAGEA ELS-01C Owner's Manual page 45

Press the number buttons to change the display pages.
4
The list contains many reverb types, more than can fit on one display page. To change
the display pages, press the appropriate number buttons [1] or [2] in the display. Select
the desired reverb type in the list, then press [CLOSE] on the upper right in the display
to close the list. After changing the reverb type, the TIME parameter below is
automatically changed corresponding to the selected reverb type.
2
TIME
Determines the reverb length for each of the Voice sections and the Organ Flute Voice.
Higher settings increase the reverberance.
Range: 0.3s – 30.0s
3
ORGAN (only for the ELS-01C/01X)
Determines the amount of reverb applied to the Organ Flute Voice. This parameter
Reference Page
corresponds to the REVERB slider contained in the ATTACK/VOLUME Page of the
Organ Flute display.
Organ Flutes (page 35)
On the ELS-01, this slider is not displayed.
Range: 0 – 24
REVERB [Page 3]
Determines the amount of reverb effect applied to each Voice section.
Each slider corresponds to the REVERB slider in Voice Condition Page 1 of the
respective Voices.
Range: 0 – 24
ELS-01/01C/01X Owner's Manual 45