9
OPTICAL OUT terminal
For connection using an optical-fiber cable. This terminal outputs a digital signal of
44.1 kHz, 16 bits.
)
USB terminals
)
- 1 USB TO DEVICE terminal(s)
For connecting USB storage devices (such as floppy disk drive) or a USB-LAN
adapter for connecting to the Internet.
)
- 2 USB TO HOST terminal
For connecting to a computer with a USB cable. To connect to a computer,
make sure that an appropriate USB-MIDI driver is installed to the computer.
USB
USB is an abbreviation for Universal Serial Bus. It is a serial interface for connecting
a computer with peripheral devices.
!
MIDI IN/OUT terminals
For connecting external MIDI devices such a synthesizer or sequencer. You can also use
these to connect with a computer that has a MIDI Interface.
USB
9
OPTICAL
TO DEVICE TO HOST
OUT
)
-1
IN
OUT
MIDI
)
!
-2
ELS-01/01C/01X Owner's Manual
Reference Page
Recording the Sounds of the
Electone to an External
Recorder (page 208)
Reference Pages
Internet Direct Connection
(page 189)
Connecting USB storage
devices or USB-LAN adapter
(page 211)
Connection with Computer
(page 212)
Reference Pages
Controlling External MIDI
Devices from the Electone
(page 210)
Controlling the Electone from
an External Device (page
211)
Connection with Computer
(page 212)
What is MIDI? (page 213)
205
1 3