Copying The Keyboard Percussion Settings - Yamaha Electone STAGEA ELS-01C Owner's Manual

5
72 ELS-01/01C/01X Owner's Manual
To erase all instruments:
You can clear all assignments using the [CLEAR] button in the display (ASSIGN Page).
1
Press, then release the [CLEAR] button. The following display
appears, prompting confirmation of the operation.
2
Press [CLEAR] in the display to erase all data. When [CLEAR] is
selected, a "Completed" message momentarily appears on the
display.
Press [CANCEL] in the display to abort the operation.

Copying the Keyboard Percussion settings

You can copy the Preset Keyboard Percussion to one of the User locations, or copy from
one User location to another. In the instructions below, Preset 1 is copied to User 1.
1
Press the KEYBOARD PERCUSSION [1] button to copy Preset 1.
To copy Preset 1, select the [1] button; to copy Preset 2, select the [2] button.
To copy either User location, select button [1] or [2].
2
Press the [MENU] button at the top right of the display to call up
the MENU Page.