Recalling Recorded Registrations (And Bulk Data); Replacing Registrations - Yamaha Electone EL-500 Owner's Manual

5
Recalling Recorded
Registrations (and Bulk Data)
The registrations (and bulk data) recorded to song numbers
in the above operation can be loaded back to the Electone by
simply selecting the appropriate song number and pressing
the PLAY button. When the operation has been completed,
the M.D.R. returns to STOP status.
The M.D.R. also makes it possible to use more than the 16
Registration Memory registrations (eight for the EL-500) in
a performance—without having to alter the current panel
settings. This would come in handy when performing
several songs in succession that use more than 16
registrations (eight for the EL-500).
To do this:
1
First record the registrations you need into several
song numbers on the M.D.R. before the
performance. (You should also try to record them
in the order that you'll use them, if possible.)
2
During the performance, after all 16 registrations
7
(eight for the EL-500) from a certain song number
have been used, select the next song number and
press the PLAY button on the M.D.R. This replaces
all 16 registrations (eight for the EL-500) in
Registration Memory with the new ones from the
selected song number.
3
By repeating the above steps, you can run through
an entire performance without having to change the
panel settings.
6

Replacing Registrations

The M.D.R. also lets you change the registrations of an
existing song without changing the performance data.
The procedure is the same as that of Recording Registrations
mentioned in the previous page.
NOTE:
Selecting the Next Song in the User Registration Shift
settings makes it possible to have the M.D.R.
automatically read the 16 registrations (eight for the
EL-500) in the next song number. See page 81 for
more information.
94