Replacing Registrations - Yamaha Electone EL-57 Owner's Manual

5 Recalling Recorded
Registrations (and Bulk Data)
The registrations (and bulk data) recorded to song
numbers in the above operation can be loaded back to
the Electone by simply selecting the appropriate song
number and pressing the PLAY button. When the
operation has been completed, the M.D.R. returns to
STOP status.
The M.D.R. also makes it possible to use more than the 8
Registration Memory registrations in a performance—without
having to alter the current panel settings. This would come in
handy when performing several songs in succession that use
more than 8 registrations.
To do this:
First record the registrations you need into several
1
song numbers on the M.D.R. before the
6
performance. (You should also try to record them
in the order that you'll use them, if possible.)
During the performance, after all 8 registrations
2
from a certain song number have been used, select
the next song number and press the PLAY button
on the M.D.R. This replaces all 8 registrations in
Registration Memory with the new ones from the
selected song number.
By repeating the above steps, you can run through
3
an entire performance without having to change
the panel settings.

6 Replacing Registrations

The M.D.R. also lets you change the registrations of an
existing song without changing the performance data.
The procedure is the same as that of "Recording
Registrations" mentioned in the previous page.
68