Table of Contents
Advertisement
Book
TOC
Chapter
TOC
Search
Quit
ADF Rubber Retard Pad Replacement
After about one year of operation, your retard pad will become
worn and may impair the performance of the document feeder.
Follow this procedure to replace the pad:
Open the document feeder cover.
1
Insert a sharp, thin object such as the tip of a small screwdriver
2
and release the latches. This will release the Holder so that you
can remove Retard Pad and Support from the machine.
Retard
Pad
Remove the retard pad and plastic support from the machine.
3
Insert a new retard pad and support onto the holder, and snap in
4
into place.
Previous Page
Holder
Support
8-25
Next Page
Advertisement
Table of Contents
Troubleshooting
