Xerox Document WorkCentre 480cx Online User's Manual page 213

Book
TOC
Chapter
TOC
Search
Quit
Note:
To install the TextBridge Pro, refer to
the Getting Started section of this manual.
To test the scanner interface and scan a document, perform the
following steps:
From the File menu, click on Select Scanner. A list of
1
supported scanner types will be displayed.
Select TWAIN. This will cause a Select Source dialog to be
2
displayed.
From the list, select Xerox WorkCentre 480cx. Click Select.
3
A dialog to test the Scanner Interface will be displayed. Select
4
Test and the port and scanner interface will be tested.
The WorkCentre 480cx TWAIN Scanner application is
5
displayed. Select the appropriate scan options for the document
or photograph to be scanned.
After adjusting the settings in the Scan window, you can
perform a preliminary preview scan of the image before
performing a final scan. To launch a preview scan:
Load the document to be scanned in the Automatic
a)
Document Feeder.
Click the Prescan button.
b)
Previous Page
Installing Software
6-13
Next Page
in