Book
TOC
Chapter
TOC
Search
Quit
You're using your WorkCentre as a stand-alone fax machine
without a PC
This is the simplest of all configurations. Plug one end of a
telephone cable into the WorkCentre's Line connector, and the
other end into the wall outlet.
Wall Outlet
The WorkCentre is set up at the factory to automatically answer an
incoming call. If you do not want the WorkCentre to answer the
phone, set the Receive mode to TEL . At the control panel, press
the Receive button (until TEL displays).
Or, you may want to leave the Receive mode on Fax , but
increase the number of rings before the WorkCentre answers the
call. At the control panel, press the following keys:
MENU, SYSTEM DATA, UP ARROW 7 TIMES (until
ANSWER ON RINGS displays)
Previous Page
From the LINE connector
TCG-3
Next Page