Table of Contents
Advertisement
Book
TOC
Chapter
TOC
Search
Quit
Symptom
Cause and Solution
The following
A scan error occurred and the scanning has not been
message appears on
completed properly. Reset your computer.
the computer
screen:
The selected port is
currently being
used. Restart your
computer and try
again.
The following
The printer cable may be improperly connected or
message appears on
the power may be off. Ensure the WC480cx is
the computer
plugged in. If the problem persists, turn the
screen:
computer and printer off. Wait about 10 seconds,
Port is disabled.
turn them both on and try again.
Check if the port is
properly connected,
power is on,
scanner is not busy.
Then restart your
computer.
Previous Page
7-31
Next Page
Advertisement
Table of Contents
Troubleshooting
