Xerox Document WorkCentre 480cx Online User's Manual page 357

Book
TOC
Chapter
TOC
Search
Quit
Plug one end of a telephone cable into the WorkCentre's Line
connector, and the other end into the wall outlet. Also, plug the PC
fax/data modem Line into the wall outlet. Plug the answering
machine into the EXT connector on the WorkCentre and the
external telephone into the Line out connector of the answering
machine. The PC printer port is connected to the WorkCentre's
printer port with the Xerox supplied printer cable.
The answering machine will answer incoming calls, but the
WorkCentre will take over if the incoming call is a fax. Set the
WorkCentre's Receive mode to ANS/FAX . At the control
panel, press the Receive button (until ANS/FAX displays).
Previous Page
TCG-12
Next Page