Xerox Document WorkCentre 480cx Online User's Manual page 274

Book
TOC
Chapter
TOC
Search
Quit
Symptom Cause and Solution
The paper • There is too much paper in the Automatic Paper
constantly Feeder (APF). Remove some of the paper from the
jams. APF. If printing onto transparencies, or labels, insert
them one at a time in the Manual Paper Feeder.
• An incorrect type of paper is being used. Use only
paper that meets the specifications required by the
printer.
• The paper setting method may be incorrect. If
printing onto envelopes, insert the envelopes so that
there is a gap of approximately 1 mm (1/32")
between the left and right edges of the envelopes at
the paper guide.
Printing is too • If using Windows 3.x, Print Manager may be
slow. disabled. From the Control Panel Printers menu,
check the Use Print Manager box.
• If using Windows 3.x, the Background Printing
item in the Option menu of Print Manager may be
set incorrectly. Select Background Printing from
the Option menu in the Print Manager.
• If using Windows 95/98 or NT 4.0, the Spooling
Setting may be set incorrectly. From the Start menu,
select Settings and Printers. Click the Work Centre
icon with the right mouse button, select Properties,
click the Details tab, and then click the Spool
Settings button. Select the desired spool setting from
the available choices.
Previous Page
7-20
Next Page