Sliding The 2U Library Into The Rack; Sliding The 4U Library Into The Rack - Dell PowerVault TL2000 User Manual

7. With library rack anchors and mounting brackets installed, slide the library
Figure 4-12. Sliding the 2U library into the rack
Figure 4-13. Sliding the 4U library into the rack
8. Using a #2 Phillips screwdriver, secure the library to the rack (see Figure 4-14
4-10
Dell PowerVault TL2000 Tape Library and TL4000 Tape Library User's Guide
additional short, counter-sunk screw included in the rack kit. (The 4U rack
anchors and mounting brackets are similar.)
onto the rails (as shown in Figure 4-12 and Figure 4-13). When the library stops,
gently push the library to lock the anchors installed on each side of the library
to the rails and until the mounting brackets are flush with the vertical rack
rails.
on page 4-11 for a 2U library; see Figure 4-15 on page 4-11 for a 4U library) by
placing a screw in the center hole of each mounting bracket and tightening
1
them ( ).