Front View Of A Rack Showing The Rails - Dell PowerVault TL2000 User Manual

Figure 4-9. Front view of a rack showing the rails installed
4. Using the Torx wrench included in your shipment, remove the screws (
Figure 4-10. 2U library side screws to remove
5. Install the library rack anchors ( 2 ) as shown in Figure 4-11 on each side of
Figure 4-11. 2U library rack anchors and mounting brackets
6. Install the library mounting brackets ( 1 ) as shown on the 2U library on each
shown in Figure 4-10. Screw locations on the 4U library are similar.
your library using the longer counter-sunk screws included in the rack kit.
1
side of the library using the screw that was removed from your library and an
1
Chapter 4. Installation and Configuration
1
) as
2
4-9