Sliding The Shelf Chassis Into The Rails; Unlocking The Casters - Dell EMC Data Domain DD9800 Installation Manual

Installation and storage expansion guide
Hide thumbs Also See for EMC Data Domain DD9800:
Table of Contents

Advertisement

Figure 29. Sliding the shelf chassis into the rails
NOTE:
You might need to release sagging tension on the shelf by pulling the lift arms and tray up slightly.
4. Unlock the casters by lifting the locking tabs, as shown in the following figure, and carefully slide the shelf into the cabinet as
far as the lift allows.
Figure 30. Unlocking the casters
5. Lock all four casters by pressing down on the locking tab, as shown in the following figure, so the lift does not roll as the
shelf is pushed into the cabinet.
CL5424
Install the Disk Shelves in the Rack
CL5431
35

Advertisement

Table of Contents
loading

Table of Contents