The 4U Library Configure Library: General And Extended Page; The 4U Library Configure Library: Logical Libraries Page - Dell PowerVault TL2000 User Manual

Figure 5-31. The 4U library Configure Library: General and Extended page
Configure Library: Logical Libraries
To partition your multi-drive library, select the number of logical libraries you
would like to create in your library, then click Submit.
One cartridge magazine cannot be assigned to two logical libraries. If you partition
a multi-drive library, each of the magazines must be assigned to a logical library
on a magazine boundary. The entire magazine must be part of one logical library
only. In a fully populated 4U library with two logical libraries, resource
assignments will be as follows:
v Logical Library 1 will contain Drive 1 and the left cartridge magazines.
v Logical Library 2 will contain Drive 2 and the right cartridge magazines.
The I/O Station and the reserved slot (or dedicated cleaning slot (DCS) if one is
assigned) are shared among all logical libraries.
Figure 5-32. The 4U library Configure Library: Logical Libraries page
Configure Library: Path Failover
This page allows the user to enter the Path Failover feature activation key. The
Path Failover feature is available for select LTO 4 tape drives. Path Failover is not
supported for half height drives. For more information, refer to the Dell PowerVault
TL4000 Failover Configuration Guide, included with the library documentation.
5-40
Dell PowerVault TL2000 Tape Library and TL4000 Tape Library User's Guide
23