Internal View Of Library; Internal View Of The Library - Dell PowerVault TL2000 User Manual

Table 1-2. 2U library and 4U library rear panel descriptions (continued)
Number Item
4
Shipping lock and
label storage
location
5
USB port
6
Serial port
7
Ethernet port
8
Tape drive LED
9
Service Tag/Serial
Number
10
Fan vents

Internal View of Library

Important: FOR REFERENCE ONLY. The customer is not authorized to remove
Figure 1-6. Internal view of the library
Description
The shipping lock, which secures the accessor during shipping, and associated
label are stored on the rear panel of the library for future use. See "Removing and
Storing the Shipping Lock" on page 4-4.
Attention: The shipping lock must be removed before powering ON the library
to allow the accessor to function properly.
An alternative communication path to the library. For use by Service Personnel.
This port is used to communicate serially with the library using an RJ-11 connector.
For use by Service Personnel.
This port is used to connect the library to a network.
This LED indicates the current status of the drive. When the LED is green, it
indicates normal drive activity.
The service tag and serial number on the pull-out label links the library to your
warranty.
These vents allow air to escape from the power supply and tape drive sled.
the top cover of the library. No customer serviceable components are
inside the library.
2
3
1
4
5
6
Chapter 1. Product Description
1-5